We at Neue Herbold offer a complete program for the size reduction (granulators, grinders, pipe-granulators, profile-granulators,
pulverizers, fine-grinders, screw-shredders, bale-breaker, hammer mills, shredders, polystyrene-shredders, guillotines, complete washing-lines) and preparation of plastic waste from production and plastic waste collection points. 

For special application projects we can provide indivdual taylor made machines and systems designed specifically for the customers needs. Included in this vast equipment spectrum are machines (hammer mills, bale breaker, guillotines) to recycle computer hardware and software, insulation material etc. 

The company was founded in 1995 and is located in the southwestern area of Germany in the town of Sinsheim, Germany. The company has a present employee standing of 50 people which combine the design, engineering, production, administration, sales department, and management to form a experienced, innovated and closely knit team. The technical sales department works hand in hand with more then 40 company representatives world wide. A focused and cost effective planning in conjunction with the latest technological engineering and exceptional quality control insure the highest standards which are mandatory for recycling and size reduction.

RANGE OF PRODUCTS INFORMATION

Pre-size reduction and bale opening

Bulky parts or films / bottles, compacted in bales, initially must be shredded or broken apart in order to relieve the operation of the down stream equipment for further processing.

NEUE HERBOLD offers the following:  

Single Shaft or Two Shaft Shredders in various sizes and designs. The sizing of each machine is relevant to the specific application. 
GS Series Guillotines available in three (3) sizes. The GS series guillotines are used to pre-cut the material to sizes which can easily be fed to the down stream equipment, commonly a granulator. 
RL Series Polystyrene - Shredders 
SB Series Screw-Shredders / Bale Breakers for opening bales of pressed PET bottles for subsequent sorting.  
Material application range of operation: film; pressed bales of film or bottles, fiber and rubber bales, large start-up lumps; typical size after processing usually larger then 50 mm end product.

Granulators

Granulators are our main product line. They are built in various types and sizes for almost every possible application in the field of plastics size reduction. Depending on the different material and form our granulators are built to meet the customers specific needs.

The following models are available: 

LM Series Granulators, are used for thin walled materials such as loose film, bottles and hollow containers, thin-wall pipes and profiles. Depending on material and wall thickness throughput rates can reach or exceed 2000 kg/h. 

SM Series Granulators in heavy-duty design can be used for the size reduction of almost all types of plastic. The SM Series is designed for size reduction of thick-walled materials such as sheet, pipe or lumps up to 50 kg in weight; capacities of more than 4000 kg/h are possible. The SM series granulator can 
be manufactured for specific material application requirements such as size reduction of cables, rubber bales or other materials other then plastics. 

LP/SP Series Granulators are specifically designed for the size reduction of maximum 20 foot length profiles, with capacities from 550 kg/h to 1600 kg/h. 

SR Series Granulators utilizing a horizontal feed channel are designed for size reducing of extremely thick walled pipe lengths with a maximum length of 6000 mm and a maximum diameter of 900 mm. Pre-cutting of the pipes is not necessary. The SR Series offers various models for pipe diameters up to 250 mm, 400 mm, 700 mm. and 900 mm. 

SMV Series Granulators are designed with special cutting features (chevron rotor configuration) for size reduction of extremely thin film (BOPP, PET etc.). 
The throughput rates range from 300-4000 kg/h (depending of the material and the final product size ). Relevant to the application (material size and shape) granulators of the LM, SM and SMV Series can be manufactured with special feed hoppers or roller feeders for automated material feed and integrated suction nozzles for inline processing of edge trim material.
Additionally the SMV Series Granulators are used for:
size reduction of film, baled bottles, profiles, fibres and various other plastic materials. This granulator is able to achieve a final product size of approx.> 4 mm.

Pulverizing systems

These pulverizing / fine-grinder systems are available in three (3) sizes, plastic granulate ( ie PVC, PC, PP, PE, PET etc.) may be pulverized to a final product size of >1 mm without screening, 0.500 mm in conjunction with a screening machine.

NEUE HERBOLD Pulverizers / Fine Grinders are used in the areas of

rigid PVC-pipe-and sheet production 
rotational molding 
Masterbatch production 
other production areas where plastic powders are used.  

In the field of pulverization NEUE HERBOLD supplies complete systems, ranging from material feeding devices, metal separators, screening systems, storage silos and sound insulation. 
Furthermore NEUE HERBOLD designs and manufactures nitrogen injected pulverizers, used for pulverization of soft and heat sensitive materials. 

Wet granulators and recycling systems for contaminated materials

In this area of application NEUE HERBOLD offers recycling systems for:

·       PE/PP bottle waste recycling with throughput rates 
   of 250 / 500 / 1000 and 2000 kg/h.

·       PE/PP film scrap recycling (agricultural film as well as 
   film waste which as been sorted out in a separating process) 
   at a throughput rate of 500 / 1000 and 2000 kg/h.

·       PET bottle recycling with throughput rates of up 
   to 2000 kg/h.

·       Systems for recycling of special applications such as 
   batteries

Systems for recycling of valuable materials

These are specially designed systems for: 

cable scrap (size reduction as well as plastics and metal separation) NEUE HERBOLD is able to supply  standard versions with throughput rates of 250 / 500 / 1000 and 2000 kg/h. 

systems for size reduction of wood scrap, tree bark and other agricultural waste for compost purposes. 

systems for size reduction of fiber glass.  

Accessories for material feeding and discharging

In addition to the engineering and manufacturing of systems, NEUE HERBOLD can supply all necessary components for main equipment feeding and down stream transport;

·       Feeding conveyors, metal detection equipment , tilt 
   dumper.

·       Transport screws, silos , screening machines , 
   shaker tables.

·       Material handling, metal separation and exhaust air filtering 
   systems.

Service, Spare-parts, Repair Service of your Granulators

Our computer data bank is regularly updated to ensure a quick turn around time of all spares and replaceable wear parts for all customer requests.

We perform periodic physical inventory of all parts in stock so that our reserves will always be available and up to date.

We offer “ same day Service “ on parts that we have directly available on stock.

Due to the our wide range of experience and engineering in the field of repair work we are capable of performing repairs on other brands of machinery.