Neue Herbold GmbH - Granulators, Hammer Mills, Profilegranulators, Pulverizers, Washinglines, Shredder, RecyclingNeue Herbold GmbH - Granulators, Hammer Mills, Profilegranulators, Pulverizers, Washinglines, Shredder, RecyclingNeue Herbold GmbH - Granulators, Hammer Mills, Profilegranulators, Pulverizers, Washinglines, Shredder, Recycling Neue Herbold - Recycling PE/PP Bottle Crates


Initial requirements for the installation of a recycling system are the detailed characteristics of the application.

- Defining the amount of contamination
  in the applicable material.
- Defining the final usage of the finished
  product.

Based on these specifications we would be in a position to engineer and manufacture a complete modular system for the application.

Typical system for processing PE/PP bottle crates.

1. Holding belt
for loading and continual feeding of material to the inclined conveyor belt.

2. Inclined conveyor belt
to transport the material to the down stream granulator.

3. Shredder (ERM / ZRM)
for pre-size reducing the crates to a initial size of 30-50 mm.

4. Discharge conveyor belt
to transport the pre-size reduced material to the holding silo.

5. Holding silo (FS Series)
for storage of the pre-shredded material and to consistently feed the down stream equipment.

6. Pre-separating/pre-soaking screw
to separate foreign material such as glass, metal and stones to protect the down stream granulator and mechanical drier and to achieve 
a higher quality final product.

7.Transport screw
for dewatering and further transport of the material to the granulator.

             Neue Herbold - Transport Screw


8. Granulator

for size reduction of the pre-shredded material to

a particle size of approx. 10 mm.

                   Neue Herbold - Granulators

9. Material transport system

for discharging the material from the granulator.

10. Mechanical dryer (TM series)

for mechanical surface drying of the material.

                    Neue Herbold - Mechanical Dryer TM Series

11. Thermal dryer (TT series)

for secondary drying of the material to a residual moisture content of less then 1%.

12. Pneumatic transport/Big-Bag discharge station.
for further transport the material and discharge into big bags.

13. Waste water pump

for transporting the contaminated water to the screening machine.

14. Screening machine
for screening of loose and swimming particles from the waste water for final discharge to drainage system.

                     Neue Herbold - Screening Machine TSM Series



Neue Herbold - Recycling PE/PP Bottle Crates


NEUE HERBOLD - HOME